Related Products

• ￩

  ￫

  

  Mounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4

  $32.00

  We developed these plates especially to mount equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
  
  - 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and corrosion resistant aluminum
  - Proprietary design with 2 holes 1/2" each for more options in placing equipment: 
  ---> Center hole is preferred hole for best weight distribution
  ---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
  - We recommend 7/16" or 3/8"bolts
  - Hand finished and individually inspected for quality
  - 4 Plates in each order
  - Other fasteners (such as washers, bolts, nuts) not included with purchase
  
  Ships same day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  Maximum quantity exceeded

  Minimum purchase amount of 0 is required
  

  Mounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4

  $32.00

  We developed these plates especially to mount equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
  
  - 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and corrosion resistant aluminum
  - Proprietary design with 2 holes 1/2" each for more options in placing equipment: 
  ---> Center hole is preferred hole for best weight distribution
  ---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
  - We recommend 7/16" or 3/8"bolts
  - Hand finished and individually inspected for quality
  - 4 Plates in each order
  - Other fasteners (such as washers, bolts, nuts) not included with purchase
  
  Ships same day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  ADD TO CART CHECKOUT NOW

  Mounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4

  $32.00

  ADD TO CART CHECKOUT NOW

  Successfully Added to your Shopping Cart

  Adding to Cart...
• ￩

  ￫

  

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 2

  $30.00

  We developed these specialty proprietary brackets to prevent large tanks from shifting from side to side on trucks and trailers.  They add more stability to your load because over top straps/bands typically only control back to front shifts.  We chose aluminum for its anticorrosive properties, and heavy duty 1/4 thick material to ensure strength.
  
  Ideal for use in harsh chemicals or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.  
  
  The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.
  - 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
  - 2 mounting holes 7/16" each
  - Heavy duty and corrosion resistant 1/4 thick aluminum
  - For 3/8" bolts or smaller
  - Hand finished and individually inspected for quality
  - 2 Plates in each order
  - Cost effective and easy to install
  - Fasteners (such as washers, bolts, nuts) not included with purchase.
  - We recommend using stainless steel fastener for best corrosion control. 
  
  Ships within a day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  Maximum quantity exceeded

  Minimum purchase amount of 0 is required
  

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 2

  $30.00

  We developed these specialty proprietary brackets to prevent large tanks from shifting from side to side on trucks and trailers.  They add more stability to your load because over top straps/bands typically only control back to front shifts.  We chose aluminum for its anticorrosive properties, and heavy duty 1/4 thick material to ensure strength.
  
  Ideal for use in harsh chemicals or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.  
  
  The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.
  - 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
  - 2 mounting holes 7/16" each
  - Heavy duty and corrosion resistant 1/4 thick aluminum
  - For 3/8" bolts or smaller
  - Hand finished and individually inspected for quality
  - 2 Plates in each order
  - Cost effective and easy to install
  - Fasteners (such as washers, bolts, nuts) not included with purchase.
  - We recommend using stainless steel fastener for best corrosion control. 
  
  Ships within a day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  ADD TO CART CHECKOUT NOW

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 2

  $30.00

  ADD TO CART CHECKOUT NOW

  Successfully Added to your Shopping Cart

  Adding to Cart...
• ￩

  ￫

  

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 4

  $55.00

  We developed these specialty proprietary brackets to prevent large tanks from shifting from side to side on trucks and trailers.  They add more stability to your load because over top straps/bands typically only control back to front shifts.  We chose aluminum for its anticorrosive properties, and heavy duty 1/4 thick material to ensure strength.
  
  Ideal for use in harsh chemicals or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.  
  
  The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.
  - 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
  - 2 mounting holes 7/16" each
  - Heavy duty and corrosion resistant 1/4 thick aluminum
  - For 3/8" bolts or smaller
  - Hand finished and individually inspected for quality
  - 4 Plates in each order
  - Cost effective and easy to install
  - Fasteners (such as washers, bolts, nuts) not included with purchase.
  - We recommend using stainless steel fastener for best corrosion control. 
  
  Ships within a day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  Maximum quantity exceeded

  Minimum purchase amount of 0 is required
  

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 4

  $55.00

  We developed these specialty proprietary brackets to prevent large tanks from shifting from side to side on trucks and trailers.  They add more stability to your load because over top straps/bands typically only control back to front shifts.  We chose aluminum for its anticorrosive properties, and heavy duty 1/4 thick material to ensure strength.
  
  Ideal for use in harsh chemicals or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.  
  
  The plates are especially useful when full tanks must travel on roads where equipment is subjected to strong movements.
  - 3" wide x 3"tall x 5" long x 1/4" thick (3 Gauge)
  - 2 mounting holes 7/16" each
  - Heavy duty and corrosion resistant 1/4 thick aluminum
  - For 3/8" bolts or smaller
  - Hand finished and individually inspected for quality
  - 4 Plates in each order
  - Cost effective and easy to install
  - Fasteners (such as washers, bolts, nuts) not included with purchase.
  - We recommend using stainless steel fastener for best corrosion control. 
  
  Ships within a day if ordered before 12:00 pm CST on a week day.  Orders after that time or placed on a weekend may ship the next week day.
  
  Interested in a custom size or a larger order?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  ADD TO CART CHECKOUT NOW

  Mounting Aluminum Shift Prevention Brackets - L-shaped Set of 4

  $55.00

  ADD TO CART CHECKOUT NOW

  Successfully Added to your Shopping Cart

  Adding to Cart...
• ￩

  ￫

  

  Stainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks

  $235.00

  STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
  
  Free Shipping to lower 48 states on orders over $300.00 
  
  - Compatible with vertical tanks measuring 27"W x 18"D x 40-44"H including the popular Ace Roto-Mold SP0007-RT
  - Made of strong 3" wide 16 gauge stainless steel
  - Semi-rigid for strength with enough flexibility to fit snugly around tanks to save space on your vehicle's deck
  - Corrosion resistant and durable
  - Proprietary design with easy to adjust middle band helps control bulging
  - Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
  - We recommend mounting with load stabilizing plates and lock nuts under vehicle's bed
  - Comes in 4 pieces easily assembled at middle band
  - Dimensions: 27"W x 18"D x 22 H
  - Tank not included with purchase
  
  Typically ships within 1 business day if ordered before 12:00 pm CST, within 2 business days if ordered after 12:00 pm CST.
  
  Interested in a custom size?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  Maximum quantity exceeded

  Minimum purchase amount of 0 is required
  

  Stainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks

  $235.00

  STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
  
  Free Shipping to lower 48 states on orders over $300.00 
  
  - Compatible with vertical tanks measuring 27"W x 18"D x 40-44"H including the popular Ace Roto-Mold SP0007-RT
  - Made of strong 3" wide 16 gauge stainless steel
  - Semi-rigid for strength with enough flexibility to fit snugly around tanks to save space on your vehicle's deck
  - Corrosion resistant and durable
  - Proprietary design with easy to adjust middle band helps control bulging
  - Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
  - We recommend mounting with load stabilizing plates and lock nuts under vehicle's bed
  - Comes in 4 pieces easily assembled at middle band
  - Dimensions: 27"W x 18"D x 22 H
  - Tank not included with purchase
  
  Typically ships within 1 business day if ordered before 12:00 pm CST, within 2 business days if ordered after 12:00 pm CST.
  
  Interested in a custom size?  Call us at 713-370-7033 or email us at sales@flowtechsys.com.
  
  Designed and fabricated in our Houston, TX facilities.

  ADD TO CART CHECKOUT NOW

  Stainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks

  $235.00

  ADD TO CART CHECKOUT NOW

  Successfully Added to your Shopping Cart

  Adding to Cart...