Industrial Super-Skid 85H3V - 8.5GPM @3000 PSI Hot Water Gas Belt-Driven Electric Start Pressure Washer 23HP Vanguard Engine
- Description
- Specifications
Industrial Strength for Efficient and Reliable Cleaning
Built with the highest quality components, our pressure washers are specifically configured to provide the best reliability and durability in the harshest conditions.
IN STOCK!
BACK ORDERS TYPICALLY READY AND SHIPPED WITHIN 7 BUSINESS DAYS. Please call to verify status.
FREE SHIPPING To lower 48 states.
APPLY FOR FINANCING.
Manufacturer warranty on components.
GPM: 8.5
PSI: 3000
Skid Frame
- Rugged powder coated steel frame with forklift channels, easy to install on your truck or trailer deck.
- 46″W x 30″D x 43″H frame dimensions offer versatile installation
- Ready to install on your truck or trailer deck
- Fully self-contained, no external power required
- Drains for engine and pump oil for easy maintenance
Pressure Washer
- Powerful and reliable 23 HP Vanguard gasoline electric start engine
- On board 10-gallon poly gas tank-Non-Carb Evaporative Compliant (Not for sale to California)
- Includes marine grade battery box, battery not included
- General Pump TSF 2021
- Belt driven
- Powerful and reliable 23 HP Vanguard gasoline electric start engine
Burner Assembly
- Reliable Beckett burner
- Super-efficient schedule 80 heating coil
- Stainless steel coil wrap and burner hood
- On board 10-gallon poly diesel fuel tank
- Adjustable thermostat
- Safety pressure relief valve
Included accessories
- Gun/wand assembly with insulated grip and quick connects
- Quick Connect nozzle set
- 50′ high-pressure hose with quick connects
Assembled in the USA:
- All units are completely factory-assembled and tested in the USA
- Delivered ready to operate
Shipped via Freight to commercial locations. No home deliveries available. Not for sale to California.
Questions? Call us anytime at 713-370-7033
GPM: 8.5
PSI: 3000
Total weigth: Approx. 600 lbs
Skid Frame
-- Powder coated steel frame w/forklift channels
-- 46″W x 30″D x 43″H compact dimensions offer versatile installation
Pressure Washer
-- Powerful and reliable 23 HP Vanguard gasoline electric start engine
-- On board 10-gallon poly gas tank-Non-Carb Evaporative Compliant (Not for sale to California)
-- Includes marine grade battery box, battery not included
-- General Pump TSF 2021
-- Belt driven
Burner Assembly
-- Reliable Beckett burner
-- Super-efficient schedule 80 heating coil
-- Stainless steel coil wrap and burner hood
-- On board 10-gallon poly diesel fuel tank
-- Adjustable thermostat
-- Safety pressure relief valve
Related Products
-
←→
Mounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4
$23.00We developed these plates especially to mount equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
These plates are especially useful when:
- Harsh conditions cause trailer or truck beds to deteriorate allowing regular washers and bolts to come through the bed, thus failing to hold the equipment.
- Traveling on roads where equipment is subjected to strong sideways or back to front movements that can pull regular washers and bolts through the bed, causing equipment to come loose.
- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and corrosion resistant aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment:
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Fit for 7/16" or smaller bolts
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase
Ships same day if ordered before 12:00 pm CST on a week day. Orders after that time or placed on a weekend may ship the next week day.
Interested in a custom size or a larger order? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Designed and fabricated in our Houston, TX facilities.Maximum quantity exceededMinimum purchase amount of 0 is requiredMounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4
$23.00We developed these plates especially to mount equipment on truck and trailers for use in harsh chemical or weather conditions often encountered in industries such as oil and gas, exterior cleaning, construction, waste management, landscaping, agriculture, fleet cleaning, transportation, marine environments, and more.
These plates are especially useful when:
- Harsh conditions cause trailer or truck beds to deteriorate allowing regular washers and bolts to come through the bed, thus failing to hold the equipment.
- Traveling on roads where equipment is subjected to strong sideways or back to front movements that can pull regular washers and bolts through the bed, causing equipment to come loose.
- 4" wide x 4"long x 1/4" thick (3 Gauge) heavy duty and corrosion resistant aluminum
- Proprietary design with 2 holes 1/2" each for more options in placing equipment:
---> Center hole is preferred hole for best weight distribution
---> The hole closer to the edge allows you to install the plate close to obstructions under the trailer or truck beds (such as cross members)
- Fit for 7/16" or smaller bolts
- Hand finished and individually inspected for quality
- 4 Plates in each order
- Other fasteners (such as washers, bolts, nuts) not included with purchase
Ships same day if ordered before 12:00 pm CST on a week day. Orders after that time or placed on a weekend may ship the next week day.
Interested in a custom size or a larger order? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Designed and fabricated in our Houston, TX facilities.Mounting Load Stabilizing Plates 4x4 in, 1/4" thick Aluminum - Set of 4
$23.00Successfully Added to your Shopping CartAdding to Cart... -
←→
4 Valve Softwash Remote Proportioner For Gasoline Pumps - Flowportioner RMG4
$2,345.00 - $2,555.00PROPORTIONER MIXING VALVES WITH REMOTE CONTROL: HAYWARD VALVES, POLYPROPYLINE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH GASOLINE POWERED SOFTWASH PUMPS |
3 sizes 1", 3/4", 1/2"
Allows a single operator to safely complete a full cleaning cycle without the need to go back and forth to the rig to turn valves on and off, or the need for an assistant.
Remote Functions:
1) SH Blend: Turns SH on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
2) Soap Blend: Turns Soap on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
3) SH+Soap: Can turn both SH and Soap together to blend with water.
4) Rinsing: turn off SH and Soap and spray only water for rinsing.
5) Third Chemical Blend: Turns on the 4th valve that can be hooked up to a third chemical (like degreaser or neutralizer) when soap and SH are shut off. The remote has a safety feature that won't allow the third chemical to turn on if SH and Soap are on.
6) Valve Rinse: Flushes out the SH valve and hoses after the other valves are turned off. The system has a safety feature that won't allow valve rinse function until other valves are shut off.
See description and specs for full details4 Valve Softwash Remote Proportioner For Gasoline Pumps - Flowportioner RMG4
$2,345.00 - $2,555.00PROPORTIONER MIXING VALVES WITH REMOTE CONTROL: HAYWARD VALVES, POLYPROPYLINE, CAMLOCKS, ON REINFORCED ALUMINUM FRAME FOR USE WITH GASOLINE POWERED SOFTWASH PUMPS |
3 sizes 1", 3/4", 1/2"
Allows a single operator to safely complete a full cleaning cycle without the need to go back and forth to the rig to turn valves on and off, or the need for an assistant.
Remote Functions:
1) SH Blend: Turns SH on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
2) Soap Blend: Turns Soap on and off to blend with water at preset rate. Easily set the ratio with our custom large metering labels.
3) SH+Soap: Can turn both SH and Soap together to blend with water.
4) Rinsing: turn off SH and Soap and spray only water for rinsing.
5) Third Chemical Blend: Turns on the 4th valve that can be hooked up to a third chemical (like degreaser or neutralizer) when soap and SH are shut off. The remote has a safety feature that won't allow the third chemical to turn on if SH and Soap are on.
6) Valve Rinse: Flushes out the SH valve and hoses after the other valves are turned off. The system has a safety feature that won't allow valve rinse function until other valves are shut off.
See description and specs for full details4 Valve Softwash Remote Proportioner For Gasoline Pumps - Flowportioner RMG4
$2,345.00 - $2,555.00Successfully Added to your Shopping CartAdding to Cart... -
←→
Stainless Steel Cradle Mounting Straps for 55 Gallon Rectangular Vertical Utility Tanks
$184.00STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
- Compatible with tanks measuring 18" wide x 18" deep x 40-44" tall including Norwesco 44856 and 44855, Ace Roto-Mold SP0055-MM, and Duracast DC-900056-1.5-NAT
Free Shipping to lower 48 states on orders over $300.00
- Made of strong 3" wide 16 gauge stainless steel
- Semi-rigid for strength with enough flexibility to fit snugly around tank to save space on your vehicle's deck
- Corrosion resistant and durable
- Proprietary design with easy to adjust middle band
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
- We recommend mounting with load stabilizing plates under wood decks and and lock nuts all deck types
- Dimensions: 18"W x 18"D x 22"H
- Tank not included in purchase
Need a custom size? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Shipping: Typically, within 1 business day if ordered before 12:00 p.m. CST, within 2 business days if ordered after 12:00 p.m. CST.
Returns and Refunds: 30 days from product delivery.
Designed and fabricated our Houston, TX facilities.Maximum quantity exceededMinimum purchase amount of 0 is requiredStainless Steel Cradle Mounting Straps for 55 Gallon Rectangular Vertical Utility Tanks
$184.00STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
- Compatible with tanks measuring 18" wide x 18" deep x 40-44" tall including Norwesco 44856 and 44855, Ace Roto-Mold SP0055-MM, and Duracast DC-900056-1.5-NAT
Free Shipping to lower 48 states on orders over $300.00
- Made of strong 3" wide 16 gauge stainless steel
- Semi-rigid for strength with enough flexibility to fit snugly around tank to save space on your vehicle's deck
- Corrosion resistant and durable
- Proprietary design with easy to adjust middle band
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
- We recommend mounting with load stabilizing plates under wood decks and and lock nuts all deck types
- Dimensions: 18"W x 18"D x 22"H
- Tank not included in purchase
Need a custom size? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Shipping: Typically, within 1 business day if ordered before 12:00 p.m. CST, within 2 business days if ordered after 12:00 p.m. CST.
Returns and Refunds: 30 days from product delivery.
Designed and fabricated our Houston, TX facilities.Stainless Steel Cradle Mounting Straps for 55 Gallon Rectangular Vertical Utility Tanks
$184.00Successfully Added to your Shopping CartAdding to Cart... -
←→
Stainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks
$235.00STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
Free Shipping to lower 48 states on orders over $300.00
- Compatible with vertical tanks measuring 27"W x 18"D x 40-44"H including the popular Ace Roto-Mold SP0007-RT
- Made of strong 3" wide 16 gauge stainless steel
- Semi-rigid for strength with enough flexibility to fit snugly around tanks to save space on your vehicle's deck
- Corrosion resistant and durable
- Proprietary design with easy to adjust middle band helps control bulging
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
- We recommend mounting with load stabilizing plates and lock nuts under vehicle's bed
- Comes in 4 pieces easily assembled at middle band
- Dimensions: 27"W x 18"D x 22 H
- Tank not included with purchase
Typically ships within 1 business day if ordered before 12:00 pm CST, within 2 business days if ordered after 12:00 pm CST.
Interested in a custom size? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Designed and fabricated in our Houston, TX facilities.Maximum quantity exceededMinimum purchase amount of 0 is requiredStainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks
$235.00STRONG, DURABLE, SPACE-SAVING, ANTI-CORROSIVE, LOW-PROFILE, EASY TO INSTALL
Free Shipping to lower 48 states on orders over $300.00
- Compatible with vertical tanks measuring 27"W x 18"D x 40-44"H including the popular Ace Roto-Mold SP0007-RT
- Made of strong 3" wide 16 gauge stainless steel
- Semi-rigid for strength with enough flexibility to fit snugly around tanks to save space on your vehicle's deck
- Corrosion resistant and durable
- Proprietary design with easy to adjust middle band helps control bulging
- Easy to install on your vehicle's deck with standard bolts (no need for J bolts)
- We recommend mounting with load stabilizing plates and lock nuts under vehicle's bed
- Comes in 4 pieces easily assembled at middle band
- Dimensions: 27"W x 18"D x 22 H
- Tank not included with purchase
Typically ships within 1 business day if ordered before 12:00 pm CST, within 2 business days if ordered after 12:00 pm CST.
Interested in a custom size? Call us at 713-370-7033 or email us at sales@flowtechsys.com.
Designed and fabricated in our Houston, TX facilities.Stainless Steel Cradle Mounting Straps for 80 Gallon Rectangular Vertical Utility Tanks
$235.00Successfully Added to your Shopping CartAdding to Cart...